Exact Solution of Tank Drainage for Bingham Fluid flow circular tube

Authors

DOI:

https://doi.org/10.21015/vtm.v12i1.1737

Abstract

Unsteady tank drainage of Bingham Plastic fluid whose flow of the fluid is due to gravity, is considered in this study. The separation of variables method is used to obtain the exact solution of the fluid. Due to very high yield stress of the fluid no slip condition is used to find out the velocity profile of the fluid. The primary objective of this work is to find the velocity profile, flow rate, shear stress, average velocity, time efflux, the relationship between the time (varying with the depth of a tank) and the time required for complete drainage from emerging partial differential equation. It has been observed that when the Bingham model parameters, flow region and pipe length increase, the time required to drain the fluid from the tank also increases. Furthermore, findings indicate that higher density and a larger pipe radius result in quicker drainage of Bingham plastic fluid from the circular tank.

References

. Alam, M. K., Memon, K., Siddiqui, A., Shah, S., Farooq, M., Ayaz, M., Nofal, T. A. and Ahmad, H. (2021), 'Modeling and analysis of high shear viscoelastic ellis thin liquid film phenomena', Physica Scripta, 96(5), 055201.

. Amur, A. A., Memon, K., Shah, S. F., Amur, M., Ahmad, H., Siddiqui, A., Ozsahin, D. U. and Askar, S. (2023), 'The hydrodynamics of gravity-driven vessel drainage of third order fluid using perturbation method', Heliyon, 9(10).

. Amur, M. A., bux Amur, K., Amur, A. A., Amur, I. A. and Memon, K. (2023), 'Adaptive numerical regularization for variational denoising model with complementary approach', VFAST Transactions on Mathematics, 11(2), 77–92.

. Dang, J., Duan, X. and Tian, S. (2022), 'Wall effects for spheroidal particle in confined bingham plastic fluids', ACS omega, 7(43), 38717–38727.

. Forbes, L. K. and Hocking, G. C. (2010), 'Unsteady draining of a fluid from a circular tank', Applied mathematical modelling, 34(12), 3958–3975.

. Fusi, L., Housiadas, K. D. and Georgiou, G. C. (2020), 'Flow of a bingham fluid in a pipe of variable radius', Journal of Non-Newtonian Fluid Mechanics, 285, 104393.

. Garg, V. K. (1998), Applied computational fluid dynamics, CRC Press.

. Hayat, T., Ahmed, N. and Sajid, M. (2008), 'Analytic solution for mhd flow of a third order fluid in a porous channel', Journal of Computational and Applied Mathematics, 214(2), 572–582.

. Hayat, T. and Kara, A. (2006), 'Couette flow of a third-grade fluid with variable magnetic field', Mathematical and Computer Modelling, 43(1-2), 132–137.

. Khaskheli, M. A., Memon, K. N., Sheikh, A. H., Siddiqui, A. M. and Shah, S. F. (2020a), 'Tank drainage for an electrically conducting newtonian fluid with the use of the bessel function', Eng. Technol. Appl. Sci. Res, 10(2).

. Khaskheli, M. A., Memon, K. N., Sheikh, A. H., Siddiqui, A. M. and Shah, S. F. (2020b), 'Tank drainage for an electrically conducting newtonian fluid with the use of the bessel function', Eng. Technol. Appl. Sci. Res, 10(2).

. Mahar, M. A., Memon, K. N., Shah, S. F., Amur, A. A. and Siddiqui, A. (2022), 'Effect of slip condition on unsteady tank drainage flow of third order fluid'.

. Memon, K., Khan, S. A., Islam, S., Zafar, N. A., Shah, S. F. and Siddiqui, A. (2014), 'Unsteady drainage of electrically conducting power law fluid', Applied Mathematics & Information Sciences, 8(5), 2287.

. Memon, K. N., Alam, M. K., Baili, J., Nawaz, Z., Shiekh, A. H. and Ahmad, H. (2021), 'Analytical solution of tank drainage flow for electrically conducting newtonian fluid', Thermal Science, 25(Spec. issue 2), 433–439.

. Memon, K., Shah, S. and Siddiqui, A. (2018), 'Exact solution of unsteady tank drainage for ellis fluid', Journal of Applied Fluid Mechanics, 11(6), 1629–1636.

. Memon, K., Siddiqui, A. and Shah, S. F. (2017), 'Exact solution of tank drainage through the circular pipe for couple stress fluid', J. Appl. Environ. Biol. Sci, 7(12), 27–34.

. Rother, M. A. (2023), 'Modelling tank drainage using a simple apparatus', International Journal of Mathematical Education in Science and Technology, pp. 1–13.

. Ryltseva, K., Borzenko, E. and Shrager, G. (2020), 'Non-newtonian fluid flow through a sudden pipe contraction under non-isothermal conditions', Journal of Non-Newtonian Fluid Mechanics, 286, 104445.

. Shah, S. A. R., Memon, K., Shah, S., Sheikh, A. and Siddiqui, A. (2022), 'Delta perturbation method for thin film flow of a third grade fluid on a vertical moving belt', STATISTICS, COMPUTING AND INTERDISCIPLINARY RESEARCH, 4(1), 61–73.

. Shah, S. M., Memon, K., Shah, S. F., Sheikh, A. H., Ghoto, A. A. and Siddiqui, A. (2019), 'Exact solution for ptt fluid on a vertical moving belt for lift with slip condition', Indian Journal of Science and Technology, 12, 30.

. Zadorozhnyi, A., Chovnyuk, Y., Stakhovsky, O., Kovrevski, A. and Buhaievskyi, S. (2023), 'Modeling the flow of a bingham plastic fluid through a circular pipeline with different wall properties', in AIP Conference Proceedings, Vol. 2490, AIP Publishing.

Downloads

Published

2024-03-23

How to Cite

Ghulam Murtaza Oghai, Memon, K. N., Syed Feroz Shah, & Azam Ali Amur. (2024). Exact Solution of Tank Drainage for Bingham Fluid flow circular tube. VFAST Transactions on Mathematics, 12(1), 60–70. https://doi.org/10.21015/vtm.v12i1.1737

Issue

Vol. 12 No. 1 (2024): January-June

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC-By) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

                                      

This work is licensed under a Creative Commons Attribution  License CC BY